FIND THE ANSWERS

Why wont my turn signals work?

Answer this question

  • Why wont my turn signals work?


Answers

Answer #1 | 26/12 2013 12:45
Change the flasher.
Positive: 0 %
Answer #2 | 26/12 2013 12:47
if they just light up and stay on without blinking, one of the bulbs might be bad. if it wont doing anything at all, check the flasher. usualy where the fuses are, under the dash.
Answer #3 | 26/12 2013 12:48
check bulbs fuses and leads but this sounds like your flasher unit has quit
Answer #4 | 26/12 2013 12:49
Check your turn signal fuse. The handbook in your glove compartment will tell you where this fuse is. If the fuse is good change the turn signal bulbs.
Answer #5 | 26/12 2013 13:25
For those of you with no turn signals: the turn signals draw power from a different fuse than the hazards. Check your fuses. If they're all good, you most likely have a bad multifunction switch (turn signal switch). The flasher is used for both the hazards and the turn signals as has already been stated. I have seen flashers that will flash the hazards but not the turn signals due to the different amount of current flow, but they'll always make funny noises or the turn signals will stay solid. Fuses, Flasher , light bulb sockets, light bulbs, wiring pigtails. All checked out good? Could be multi-function switch. just a thought

Possible answer