my 95 accura integra is overheating. but im not loosing any flood?

Answer this question

  • my 95 accura integra is overheating. but im not loosing any flood?


Answer #1 | 22/12 2013 13:55
Replace thermostat and radiator.
Answer #2 | 23/12 2013 11:07
Your thermostat is locked in the closed position. Replace it.
Answer #3 | 24/12 2013 19:03
It is possible your fan is not working. Is the over heating caused at idle?
Answer #4 | 26/12 2013 12:31
Possibilities: thermostat- thermostat is bad and won't open clogged radiator fan- cooling fan (not A/C fan which is next to it) might not turn on bad hoses- This is an interesting one because hoses actually go bad from the inside out. temperature sending unit- a really cheap part that can cause this when it is faulty. I had a Honda CR-V that kept overheating. Mechanics kept saying headgasket, after I spent over $1,000 having my entire cooling system replaced. Decided I'll do the headgasket myself. I went to Autozone to get a kit. Counterperson was a huge Honda guy. He asked me what was wrong. I told him and what had been replaced. I also told him that four different mechanics told me head gasket was the only thing left. He asked if the temperature sending unit had been replaced..which it hadn't. He recommended me doing that before taking on the head gasket. Part costed me $20 and he installed for me on his lunch break. Problem solved. It never overheated again. The reason I say this is because the B20 that was in my CR-V is essentially an Integra engine with slightly larger pistons.

Possible answer

Login to your account
Create new account