my 2008 honda accord low beam wont work but the high beam does?

Answer this question

  • my 2008 honda accord low beam wont work but the high beam does?


Answer #1 | 27/12 2013 16:38
If bulbs and fuses definitely OK, it's down to headlight switch, relay or wire connections. You should be able to locate the low beam relay by listening for the click when you turn lights on and off (on low beam), but if switch or relay really bad, no click. There should be a guide to relay locations somewhere, either on a fuse panel or on a relay box (maybe inside the cover) under the hood. There may be identical relays you can swap to check one that does not work, but clicks.
Positive: 100 %
Answer #2 | 27/12 2013 16:17
its an 08 I would check the relay, the switch, the fuse, connections, wires and bulbs
Positive: 100 %
Answer #3 | 27/12 2013 16:28
Check bulbs first. Look for frayed or broken wire. If this is on both, it could be your switch.
Answer #4 | 27/12 2013 16:14
Check for power and ground at the headlight connector with the low beam on. You might have a bad ground, a bad fuse, a bad relay or a bad switch or simply a bad bulb/s.
Answer #5 | 27/12 2013 16:14
Most likely you just need to replace the bulbs.
Answer #6 | 27/12 2013 16:17
Might want to check the blubs again. if the filments look burt in anyway the bulb will not work. It not uncomomn for one bulb to blow then the other one to go before you notice they are out.

Possible answer