FIND THE ANSWERS

How to know when an alternator of my car is bad or needs to be replaced?

Answer this question

  • How to know when an alternator of my car is bad or needs to be replaced?


Answers

Answer #1 | 05/06 2017 13:13
You test the output with a cheap digital multimeter. See link.
Positive: 56.896551724138 %
Answer #2 | 05/06 2017 13:12
The alternator is a key component of your vehicle’s electrical system. While the battery stores electricity and supplies a power source for when the vehicle is turned off, it’s the alternator that continuously recharges the battery as the engine runs. If the alternator malfunctions or dies completely, not only does the car battery fail to charge, your vehicle will stop operating altogether. Therefore, it is essential for you to determine whether your alternator is working correctly or needs to be replaced. Things you’ll need to check: Voltage meter Pop the hood and locate the battery. Remove any protective shields or coverings from the battery. It is important that the car is not running, as first you must check only the battery’s voltage to eliminate it as the culprit and establish a baseline. TIP: If you haven’t changed the serpentine belt, which runs the alternator, in more than 50,000 miles, replace it with a new one. A faulty, loose belt can cause a perfectly fine alternator to not work correctly. Connect the positive lead of your voltage meter to the positive terminal on the battery (marked with a plus sign). Similarly, connect the negative lead of the meter to the battery’s negative terminal (marked with a minus sign). TIP: Clean your posts and terminals of your battery. Sometimes, dirty or corroded connections do not allow your alternator to properly charge the battery. Also, make sure the connections are tight. Look at the readout on your voltage meter. Your meter should show a reading of approximately 12.5 to 12.8 volts. Remember, the engine should not be running when you take this reading. Also, turn off all electrical accessories (radio, lights, etc.). Start your vehicle and allow it idle. Make sure all electrical accessories are turned off. Connect the positive lead of your voltage meter to the battery’s positive terminal and the negative lead to the negative terminal. TIP: Examine the alternator for any signs of wear. For example, if you hear a rattling from the alternator or if it vibrates excessively while the vehicle is running, chances are it needs repair. Take note of the reading on your voltage meter. You should see an increase of voltage, anywhere from 13.6 to 14.3 volts. If you fail to see an increase in voltage output, that means the alternator is not producing a charge and is in need of repair or replacement. If you are facing problem with alternator or any other issue then please visit us at Parts-avatar Toronto Car Parts and we’ll discuss your options and help you to fix it.
Positive: 51.785714285714 %
Answer #3 | 05/06 2017 13:19
Ask.
Positive: 54.285714285714 %

Possible answer