Configuration for 50 inch proscan tv?

Answer this question

  • Configuration for 50 inch proscan tv?


Answer #1 | 22/12 2013 08:59
First. check the manual for the specs before configuring. Normally aspect should be 16x9 widescreen but can be changed later to suit the device providing signal. If the TV is 1080P then you will have to configure the source( cable box, satellite receiver) to 1080P. Compatibility is the main issue here. When trying to program an outside source remote (DISH, DirecTV,) remember you may not find a code for proscan in the manuals. BUT the codes for Panasonic should hit the unit. Hope this helps.
Positive: 50 %

Possible answer