FIND THE ANSWERS

I had a heater plugged in and it broke my outlet?

Answer this question

  • I had a heater plugged in and it broke my outlet?


Answers

Answer #1 | 21/12 2013 23:19
Check the circuit breakers or fuses.
Positive: 61 %
Answer #2 | 21/12 2013 23:23
Your heater draws too much elecricity for the circuit it is plugged into, Turn it off, then replace the blown fuse or reset the popped circuit breaker.
Positive: 55 %
Answer #3 | 21/12 2013 23:31
Each outlet or group of outlets has a circuit breaker or Fuse. The total drain of all the things on that circuit may have blown the fuse or circuit breaker. See what else is not working, and try to determine what you can unplug. A 1000 watt heater draws only enough power to equal half the 20 amp capability of most home circuits. That heater, a TV, a bunch of lamps, a computer and several other things in the same circuit could easily add up to enough current to pop the breaker. Find another circuit that doesn't have as much load on it.
Positive: 35 %

Possible answer

This is a guide about repairing an electric outlet. Ad. ... I plugged my vacuum and straightening iron into ... My daughter had an inexpensive fan in her ...
Read more
Positive: 61 %
I have had Edenpure Gen4 heater for 3 years and it ... burned the wall and the outlet where it was plugged. ... my EdenPURE heater 4 years ago and ...
Read more
Positive: 56 %
Usually when an outlet goes dead, ... Troubleshooting Dead Outlets; ... there’s a problem in the wiring or in something that’s plugged into the circuit.
Read more
Positive: 42 %
Replace a Broken Outlet Replace a Broken Outlet. By: ... cord slide between when it is plugged in. The prongs are held in the outlet by means of the ...
Read more
Positive: 19 %

Show more results