How to use clutch to drive very slowly and complete manouveres correctly?

Answer this question

  • How to use clutch to drive very slowly and complete manouveres correctly?


Answer #1 | 23/12 2013 01:31
Hi Ben in a word Practice. if i can do it with hand controls you should have no bother with four working limbs.
Positive: 31 %
Answer #2 | 23/12 2013 14:19
The trick is: disengage (press) and engage (release) slowly, but not too slowly. In very tight maneuvers, play the clutch at mid-travel to inch the vehicle ahead or in reverse. It takes some practice. Imagine the clutch as two friction disks, one powered by the engine and the other connected to the wheels. It is inevitable that they should slide with respect to each other, but try to reduce this to the minimum so that the clutch can last many miles before overhaul. You will also use the clutch during braking, but just at the final stage when the engine would be choked by the brake - the clutch is pressed to disengage and let the engine idle freely while the wheels are being stopped. During braking at normal driving speed, clutch should not be touched.
Positive: 25 %

Possible answer

How to Use the Clutch on a Motorcycle ... Release the clutch slowly and give your bike enough gas to get moving. ... How to Drive a Motorcycle With a Clutch.
Read more
Positive: 31 %
Centrifugal Clutches: ... The 10 tooth clutches use #40,41 or 420 chain. ... Max-Torque Belt Drive Centrifugal Clutches. Part Number. Description.
Read more
Positive: 26 %
An automatic transmission, ... controlled by these valves drives the various clutch and brake band ... use a mechanical clutch to transmit ...
Read more
Positive: 12 %
How to drive stick, ... let the clutch out slowly. ... press in the clutch, use the brake pedal to slow to your preferred speed, ...
Read more
Positive: 10 %

Show more results